USA-Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio
communications.
However, there is no ensured specification that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and
on, the user is encouraged to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the
equipment.
Caution: Exposure to Radio Frequency Radiation.
This device must be installed with a separation distance of 20 cm from the user and should not be co-located or operating in conjunction with
any other antenna or transmitter.
Canada – Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of this device.
(French)
L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
(1) Il ne doit pas produire d’interference.
(2) L’ utilisateur du dispositif doit étre pr?t ? accepter toute interference radioélectrique reçu, m?me si celle-ci est susceptible de comprom-
ettre le fonctionnement du dispositif.
Caution: Exposure to Radio Frequency Radiation.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health
Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb
The printer BLUETOOTH code can be viewed once recognized by going to “BLUETOOTH ?” function in the submenu of the SERVICE function of the
101-Series Integrity Test Device .
When both the 3M™ 101 Series Integrity Test Device and printer are turned on, connection between devices is automatic and the 3M 101 Series
Integrity Test Device will display “PRINTER CONNECTED”. If the printer or the 3M 101 Series Integrity Test Device is switched off, the Bluetooth con-
nection is terminated. The 3M 101 Series Integrity Test Device will intermittently display “PRINTER NOT READY” once the Bluetooth
-20-
