Installation
2 Part Base Plate with Cover
If using the
2 Part Baseplate
(3-15-6500-KC) for concrete substrate please follow these instructions. Use of the
2 Part Baseplate
can ease installation of
Versa Posts
where a large quantity of posts are ordered as they allow multiple installers to work
simultaneously. The
2 Part Baseplate
is also recommended for cantilever applications as the anchor into the concrete is more
robust than the single part baseplate.
1
2
3
Fasten steel portion of two part baseplate to flush
anchors using provided M8
Low Head Socket Cap Screws.
Refer to the Hilti Anchor
Instructions that ship on
3form Technical Specs and
Downloads (also ships with
hardware) for drilling and
inserting Flush Anchors
into concrete.
Install cover plate prior to attaching aluminum portion
of
2 Part Baseplate
to
Versa Post
using provided #12
self-tapping screws (3-15-0869). These self-tapping
screws require a #3 square drive bit for installation.
HILTI
3a
*For cantilever installations above 72" only.
Once #12 self-tapping screws are in place, attach the
SHCS Low Profile M12 � 30m (3-15-1938) into the
center hole of the extrusion.
*For installations greater than 72", attach base plate to the
end of the extrusion that has the tapped center hole.
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 MAN-004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versa
tm
Installation Manual
3 5