Solution 3
Doors
Example 1
Drop Ceiling Privacy Divider with Hinged Door
The
Versa
system is now more flexible than ever with the inclusion of hinged door hardware to create options for dressing room
partitions and more. In this example,
Versa Brackets
are attached directly to the wall with profiles bolted to the floor using floor
plates and attached to the structure above the drop ceiling using the
Pressure Fit Assembly
, which is then covered with the
Base
Plate Cover
. These profiles are used to support the panels that are attached to the wall. A hinged door with a door latch is then
used to close the door. Exposed slots in the profile are hidden using the
Slot Cover
and the
Floor Plate Cover
conceals the screws
on the
Floor Plate
, creating a clean, simple partition system. It is recommended that doors be no more than 36" wide; otherwise
the doors will be too flexible.
Note:
Versa Hinge and Latch Panel must be used with 1/2" gauge Varia.
Slot Cover
3-15-1732
(4)
or
Blade
Beam
(2)
(2)
or
or
Bottom Plate
3-15-1736-K
5" Two Part Bottom
Plate for Concrete
(Requires Cover Plate)
3-15-6500-KC
Square Base Plate
3-15-6502-K
(2)
(2)
(2)
Door Hinge
3-15-1737-K
(3)
(2)
Pressure Fit Assembly
3-15-0804-K
(1)
Door Catch
3-15-1739-K
(1)
Door Latch
3-15-1738
(6)
Wall Plate
3-15-0019
+
3/8" Side Bracket
3-15-0787-K
(6)
2 Piece Bracket
3-15-1752-K
(2)
(2)
Blade Plate Cover
3-15-1733-K
Beam Plate Cover
3-15-0136-K
or
For more information, please visit 3-form.com or call 800.726.0126
AUG 2019 | MAN-004 Versa | REV 017 © 2018 3form, Inc. All rights reserved.
Versa
tm
Solution Document/Installation Manual
2 0