3e-525A Wireless Access Point
48
29000132-001 A
Chapter 4: Configure as gateway
29000132-001 A
49
You can then proceed to change the management screens as necessary
to reconfigure the device as a gateway. Configuration in gateway mode
allows you to set firewall parameters. This is the main difference between
the screens you will see in gateway mode and those covered in access
point setup as discussed in Chapter 3.
Note that the 3e-525A AP is not FIPS 140-2 compliant in gateway
mode.
The following sections cover the functions and screens in gateway
mode. Much of the infomation is similar to the access point mode but is
presented here for your convenience.
System Configuration
General
The
System Configuration—General
page for the 3e-525A AP gate-
way lists the firmware version for your 3e-525A AP and allows you to set
the Host Name and Domain Name as well as establish system date and
time. (Host and Domain Names are both set at the factory for “default”
but can optionally be assigned a unique name for each.) When you are
satisfied with your changes, click
Apply
.
Summary of Contents for 3e-525A
