3e Technologies International 3e-525A, User Manual

Page: 30 / 109

3e-525A Outdoor Access Point
20 29000132-001 A
29000132-001 A 21
Advanced Options
Beacon interval
0-4095 The frequency in milliseconds in which the
802.11 beacon is transmitted by the AP.
RTS Threshold
0-3000 The number of bytes used for the RTS/CTS
handshake boundary. When a packet size is
greater than the RTS threshold, the RTS/CTS
handshaking is performed.
Fragmentation 256-2346 even
only
Fragmentation boundary in bytes.
DTIM
1-65535 The number of beacon intervals between suc-
cessive Delivery Traffic
Identification Maps (DTIMs). This feature is
used for Power Save Mode.
Basic Rates Basic Rates for 802.11b
- 1 and 2 Mbps
- 1, 2, 5.5 and
11 Mbps
The basic rates used and reported by the
AP. The highest rate specified is the rate that
the AP uses when transmitting broadcast/
multicast and management frames.
Basic Rates for 802.11g or 802.11b/g mixed
- 1 and 2 Mbps
- 1, 2, 5.5 , 11,
12, and 24
Mbps
The basic rates used and reported by the
AP. The highest rate specified is the rate that
the AP uses when transmitting broadcast/
multicast and management frames.
Supported Rates Supported Rates for 802.11b
All Rates
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps The rate at which all data frames will be
transmitted
Supported Rates for 802.11g or 802.11b/g mixed
All Rates
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps
12 Mbps
18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps The rate at which all data frames will be
transmitted
Preamble
Short/Long
Preamble
Specifies whether frames are transmitted with
the Short or Long Preamble
Broadcast SSID Enabled/
disabled
When disabled, the AP hides the SSID in
outgoing beacon frames and stations cannot
obtain the SSID through passive scanning.
Also, when it is disabled, the AP doesn’t
send probe responses to probe requests with
unspecified SSIDs.