Next, re-insert the screws to mount the extruder-side mounting as shown. The screw holes are
designed to be loose so that you can adjust the brass fitting until it fits exactly over the filament
feed position.
The next step is to attach the external PTFE mount. Its designed to go on the left side because
of the way the FT-5’s carriage is oriented, but you can also ditch that part and make your own
top mounted filament holder. Attach to the top and middle rails as shown below using the
standard bolts and t-nuts. Some will be included, but you can also use any left over from
assembling the FT-5 kit.
Copyright 2018 3DUpfitters
15
