Rear Panels
1. Loosen the Right Rear Corner Braces
Following the same procedure as with the front, loosen the t-nuts on the braces
securing the right-rear corner braces. This will give access to insert both the rear and
right-side panels.
FT-5 Back View
2. Top Rear Panel
The rear panel has an access circle that by default is covered by a circular plastic
cover which is attached via M5 8mm screws. If you purchased the optional filter/fan
options do not attach the cover. Note that the access hole can be placed on either
side. Remember to cut and place the rubber trim pieces to avoid rattling.
Copyright 2018 3DUpfitters
11
