18
THERMAL GIMBAL FOR 3DR SOLO MANUAL
3DR SOLO App Configuration and Setup
3DR SOLO APP AND PWM ASSIGNMENTS:
To access the camera settings,
tap the sliders icon immediately
below the record button:
(Fig. 34)
Tip: Once recording is engaged, the settings are locked out. Stop recording to change
camera settings while flying.
The two camera-settings areas, available from the buttons on the right side of the screen, are
Camera Mode and Camera Settings.
Camera Mode:
Will only work in Video Mode, to
record continuous video, start and stop.
Photo/Burst Mode
is not available for use at this
time. The VUE PRO Thermal Imager can be set to
photo mode through the FLIR VUE PRO App.
Camera Settings:
will be automatically set to
GoPro Silver
.
No further adjustment will be necessary.
FOV:
Will control the additional PWM channel
(
PWM 2
) which can be setup in the FLIR VUE
PRO App before flight.
(Fig. 35)
