background image

8

Step 7: Let’s Switch to PLA Plastic!

PLA Plastic

ABS Plastic

The color of the 

Plastic will 

change once the 

PLA starts 

extruding. It will appear mixed 
at first. 

STOP extrusion by 

pushing either button once.

SLOW
FAST

Click 

FAST or SLOW once to 

continue extruding the 

PLA 

Plastic and Doodle as you wish.

Step 8: Power Down

Move the

 Control Switch 

to 

OFF.

After 5 minutes of inactivity, the 

3Doodler ’s heating 

system will automatically power down. You will need to press one 
of the 

Speed Buttons OR toggle the Control Switch OFF and then 

ON again to continue use. 

SECTION 3: TROUBLESHOOTING

Tools (Provided in Box)

Before showing you how to troubleshoot issues 

with your 3Doodler , we want to introduce 

you to three handy tools provided in your box:

Mini Spanner 

Used for tightening and 

removing the 

Nozzle

Do not remove Nozzle 

when Pen is cold. 
Do not overtighten the 

Nozzle, as you may 

break it.

Unblocking Tool 

Used for pushing short 

pieces of

 Plastic down 

into the 

Drive Gear to 

help with extrusion 

from 

Pen.

Mini Screwdriver 

Keep this handy 

for removing the 

Maintenance Cover.

Keep this handy 

for removing the 

Maintenance Cover 

or rotating the 

Temperature Adjuster 

(See the3doodler.com/

temperature)

With those introductions over, it’s time to look 

at the different issues that may arise with your 

3Doodler and steps to get back 

to Doodling.

3Doodler_Bob_User_Manual_MAIN_Inner_20180511.indd   8

11/5/2018   11:37 AM

Summary of Contents for Create+
















Reviews: