7
x1
x1
Step 7: Let’s Switch to PLA Plastic!
With
Pen on ABS / FLX, load a
new strand of
PLA Plastic into
Plastic Loading Port. Use a
different color to the
ABS you
were using before.
PLA Plastic
ABS Plastic
The color of the
Plastic will
change once the
PLA starts
extruding. It will appear mixed
at first.
STOP extrusion by
pushing either button once.
SLOW
FAST
Light to RED
Light to GREEN
Click
FAST or SLOW once to
continue extruding the
PLA
Plastic and Doodle as you wish.
Switch
Pen to PLA setting. Wait
for
Light to turn GREEN.
Step 8: Power Down
Remove all
Plastic from the
Pen using the Reverse feature
(double click any
Speed
Button). Friendly reminder to
snip those ends!
Move the
Control Switch
to
OFF.
Allow your
3Doodler
to cool completely
before storing.
We recommend powering down and giving your
3Doodler
a 30 minutes break after every 2 hours of
continuous use.
After 5 minutes of inactivity, the
3Doodler ’s heating
system will automatically power down. You will need to press one
of the
Speed Buttons OR toggle the Control Switch OFF and then
ON again to continue use.
NOTE:
SECTION 3: TROUBLESHOOTING
Tools (Provided in Box)
Before showing you how to troubleshoot issues
with your 3Doodler , we want to introduce
you to three handy tools provided in your box:
Mini Screwdriver
Keep this handy
for removing the
Maintenance Cover.
Keep this handy
for removing the
Maintenance Cover
or rotating the
Temperature Adjuster
(See the3doodler.com/
temperature)
With those introductions over, it’s time to look
at the different issues that may arise with your
3Doodler and steps to get back
to Doodling.
TAKE A BREAK:
Power Adapter
x2
BLUE
light
PLA
Plastic
1
2
4
3
1
3
2
3Doodler_Bob_User_Manual_MAIN_Inner_20180511.indd 7
11/5/2018 11:37 AM
