5
PRINTING WITH FLEXIBLE FILAMENTS
5.2
Printing NinjaFlex with CuraEngine
Download the filament configuration file “NinjaFlex.rcf”, and import the file into Repetier-
Host and slice the model following steps in Section 3.2.3. In Figure 5.3, the default quality
of 0.2mm, a slow speed and a 25% infill density were selected, and the cooling was enabled
for printing with NinjaFlex.
Figure 5.3: Specifying CuraEngine slicing parameters for printing with NinjaFlex
After setting up the slicing parameters, click “Slice with CuraEngine” button, and after
the slicing is completed, the G-code is previewed in Repetier-Host as shown in Figure 5.4.
http: // 3dmakerworld. com
63