Installing Hardware
Chapter 1 - Installation
4
3.
Determine which slot you are going to use and remove its back panel cover.
4.
Attach the anti-static strap to your wrist, and attach the other end to a bare,
conductive (as opposed to painted or sticker-covered) area of your system’s chassis.
5.
Remove the card from its anti-static packaging.
Write down the serial number for
registration and future use.
6.
Place the card into the expansion slot, and seat it firmly. See your system
documentation for instructions on securing the card to the chassis. Loose cards and
connections can cause grounding and operating problems.
7.
Remove the anti-static strap and replace the cover on your system.
Summary of Contents for GVX1
