Installing Hardware
3
3Dlabs Oxygen VX1/GVX1 User’s Guide
Installing Hardware
Oxygen GVX1 cards are AGP-compatible; Oxygen VX1 cards are available in PCI and AGP
versions.Check the documentation for your system for the location of PCI and AGP
expansion slots in your system.
To remove an old card from your system
1.
Turn off and unplug the power source for your system and each of
its peripherals.
2.
Unplug the monitor cable from the old card.
3.
Attach the anti-static strap to your wrist, and attach the other end to a bare,
conductive (as opposed to painted or sticker-covered) area of your system’s chassis.
4.
Remove any screws securing the card to the chassis.
5.
Lift the card out of the slot.
To install your Oxygen card
1.
Turn off and unplug the power source for your system and each of its peripherals, if
you have not already done so.
2.
Remove the cover from your system so you can access an appropriate expansion slot.
(See your system documentation for AGP and PCI slot locations.)
Summary of Contents for GVX1
