background image

3DiJoy Corporation

                                 

                                                                                            Model: EM1102 

 

 

Page4 of Page5 

 

Connection 

NOTE: Make sure you have placed batteries in the FlingPC remote controller. 

1.  Open the 3DIJOY games and follow the instructions to the connection stage 

2.  Press the CONNECT button on the FlingPC remote controller. 

3.  The Player LEDs on the FlingPC remote controller will blink and the computer will try to connect to the FlingPC remote 

controller. 

4.  When “CONNECTING” in the screen becomes “CONNECTED” and the image of FlingPC remote controller in the 

screen becomes the solid image. The connection for the controller is complete and the Player LED blinking stops. The 

LED that is illuminated indicates the player number. 

 

This procedure must be followed for each additional FlingPC Remote Controller added to your system. 

 

 

 

 

During the connecting process, the number of 

LEDs that blink will show the battery life of the 

remote that is being connected. 

 

 

 

 

 

 

After the connecting process, LED that is lit shows 

the player number for that remote. 

 

 

 

 

NOTE: 

1.  Before connection, please check the computer to make sure that the Bluetooth dongle is plugged into the computer if 

the computer does not have the Bluetooth module inside and Bluetooth is enabled in the computer   

2. 

If the Player LEDs blinking stops, the connection is not complete. Please repeat 2) and 3) until the connection is 

complete 

     

 

Summary of Contents for FlingPC EM1102







Reviews: