3DiJoy Corporation
Model: EM1102
Page2 of Page5
System Setup
Setup of the FlingPC Remote Controller
The Remote Controller uses AA batteries. 3DiJoy recommends high quality alkaline batteries for best performance and
longevity of battery life.
WARNING-Battery Leakage
Leakage of battery acid can cause personal injury as well as damage to your Remote Controller. If battery leakage occurs,
thoroughly wash the affected skin and clothes. keep battery acid away from your eyes and mouth. Leaking batteries may
make popping sounds.
To avoid battery leakage:
z
Do not mix used and new batteries (replace all batteries at the same time).
z
Do not mix different brands of batteries.
z
3DiJoy recommends alkaline batteries. Do not use lithium ion, nickel cadmium (nicad), or carbon zinc batteries.
z
Do not leave batteries in the Remote Controller for long periods of non-use.
z
Do not recharge the batteries.
z
Do not put the batteries in backwards. Make sure that the positive (+) and negative (-) ends are facing in the correct
directions. Insert the negative end first when removing batteries, remove the positive end first.
z
Do not dispose of batteries in a fire.
Installing Batteries
1. Remove the battery cover on the back of the FlingPC Remote Controller and insert two AA batteries.
