18
4.3.
STATUS TYPES
The highlighted area tells you the current status of the extruder. The following
status types may occur during operation:
Status type
Information
Idle
Initial startup state of the extruder
Homing positioner
Resets the positioner to a known state before use.
Heating
Heats up the barrel to the set temperatures after the
positioner homing is completed
Prepared
Only shown when the ‘manual start’ option is used.
The extruder is on temperature and ready to start
until the timeout of X minutes is reached.
Running
The heaters have reached their set point, the extruder
motor is started.
Error
Only shown when an error has occurred before or
during the extrusion process.