A
Fig. 2
NOTE:
The Restraint Rings can be located in any position on the
bed, however, recommended locations are shown in (
Fig.1
).
Apply thread lock to the internal threads on the Barrel Nut.
1.
Assemble the parts as shown in (
Fig. 2
) for locations
2.
designated as B, attaching the Barrel Nut to the hardware or
anchor coming from the bottom of the bed. Tighten the
hardware securely. When positioning the Restraint Block on
the opposite side of the bed, be sure to align the pin holes
directly across the bed (
see Fig. 1
). This will ensure that the
restraint straps are perpendicular to the bed.
Align Pin holes
on opposite sides
of bed.
3
2
1
"B" Restraint Positions
Head
Fig. 1
A B A B B
Foot
A B A B B
A
A
A
A
"A" Non-Restraint Positions
Installation
Tools Needed
Low RPM Variable Speed Drill
Torx Bit T45
PARTS LIST
ITEM
NO.
QTY
PART
NUMBER
DESCRIPTION
1
1
002-013
Attenda, Restraint Ring Block
2
1
026-006
Washer, Flat 11/32 ID X 3/4 OD X 0.050, 18-8 SST
3
1
029-021
Nut, Barrel 5/16"-18 X 0.75”L, BH, Pin in Torx® T45, SST
4
1
029-162
Key, Removable Restraint Ring, Push-Lock Pin, Attenda
5
1
029-139
Ring, Attenda, Restraint, Solid, Removable
6
1
002-017
Attenda, Restraint Ring Push-Lock Pin, SS, Removable
7
1
002-019
Attenda, Restraint Ring Spacer, For Push-Lock Pin,
Stainless Steel, Removable
Rev. B - 10/01/18
091-953
Page 1 of 2
www.norix.com ● TEL 800 234-4900
Assembly Notes:
Norix is not responsible for any damage due to improper installation. If your shipment does not match the parts list, please contact Norix Customer Service at 800-234-4900.
Norix reserves the right to modify design specifications at any time without an obligation to owners of previously sold products.
___________________________________________________________________________________________________________________________________________________________________________________________________
Removable Restraint Rings
Assembly Instructions
Model Number
ATN-RR01K
ATN-RR06K