14
3D SYSTEMS, INC
.
16
FACILITY REQUIREMENTS CHECKLIST
In the sections that follow, you will find all the requirements your facility must meet before your ProX
®
DMP100 can be installed.
After your facility meets all of these requirements, complete and sign the
“Facility Requirements Checklist - ProX® DMP100”
on page 15
and submit it to 3D Systems Customer Support for review.
When Customer Support receives your completed checklist, a 3D Systems representative will contact you to verify your facility’s
readiness. When the representative is confident that all facility requirements are met, he or she will schedule a trip to your site
to install the ProX
®
DMP100 and any additional equipment which was ordered.
NOTE: All facility requirements must be met before 3D Systems can schedule a trip to your facility to install the
equipment .
HOW TO SUBMIT YOUR COMPLETED FACILITIES CHECKLIST
Submit your completed Facility Requirements Checklist by fax, mail, or email to one of the 3D Systems Customer Support sites
below. This notifies them that your facility is fully prepared for installation.
COMMUNICATIONS FORMAT
NORTH & SOUTH AMERICA
EMEA; ASIA PACIFIC
Fax
+1 512-339-0634
attn: Customer Support
+33 473 334 586
attn: Customer Support
3D Systems Corporation
333 Three D Systems Circle
Rock Hill, SC 29730, USA
attn: Customer Support
3D Systems
Parc Européen d’Entreprises
Rue Richard Wagner
63200 Riom, France
attn: Customer Support
Be sure to include the date you submitted your completed checklist so installation can be scheduled as quickly as possible.
If you need to speak to a 3D Systems Customer Support representative about your facility requirements, call:
•
US and Canada: 888-598-1438
•
International: +1 803-326-3930
•
UK and EMEA: (+44) 1442 279883
•
Europe: (+33) 4.73.33.45.85