05.1 Moving Equipment and Access for System Installation
Moving Equipment and Access Requirements
Moving and positioning the crated ProJet™ 7000 requires a pallet jack or roll-a-lifts, (customer supplied).
Passageways and doors must be wide enough to allow for moving and turning the ProJet™ 7000, (with lifting equipment when crated).
Most standard doorways and halls provide adequate access for moving the system.
The ProJet™ 7000 is equipped with wheels and can be rolled when uncrated.
ProJet™ 7000 Dimensions
Crated
Height - 2002 mm (78.8 in)
Width - 1909 mm (75.2 in)
Depth - 1039 mm (40.9 in)
Weight -
690
kg (
1519
lbs)
Uncrated
without cart
Height - 1826.7 mm (71.9 in)
Width - 980.7 mm (38.6 in)
Depth - 854.0 mm (33.6 in)
Weight -
325
kg (
715
lbs)
Material Cart Dimensions
Crated
Height - 1200 mm (47.2 in)
Width - 684 mm (26.9 in)
Depth - 795 mm (31.3 in)
Weight -
147
kg (
323
lbs)
Uncrated
- empty tray
Height - 1023 mm (40.3 in)
Width - 596 mm (23.5 in)
Depth - 708 mm (27.9 in)
Weight -
100
kg (
220
lbs)
: Unpacking crates must be supervised or performed by a 3D Systems Customer Service Engineer.
Note
3D Systems takes no responsibility for missing items if crates are opened without a Customer Service Engineer present.
Uncrated
- full tray
Weight -
197
kg (
433.4
lbs)