3D Systems ProJet 7000 Facility Requirements Manual Download Page 31 | Manualshive

Page: 31 / 34

3D Systems ProJet 7000 Facility Requirements Manual Download Page 31

11.0 Ancillary Supplies and Equipment

Part Washing Systems
3D Systems, Inc.
333 Three D Systems Circle
Rock Hill, SC 29730
Cure unit, p/n 273997-01
Washer, p/n 273998-01

Uninterruptible Power Supply
American Power Conversion or Toshiba
5KVA

Hand-Held UV Guns
DDU Enterprises
2909 Oregon Ct, Ste A2
Torrance, CA 90503
Tel: 310.781.1199 Fax: 310.781.9223

Model Finishing Tools and Supplies
Micro-Mark
340 Snyder Ave.
Berkeley Heights, NJ 07922
Tel: 800.225.1066 Fax: 908.665.9383
Emerson Electric Co., Dremel Division
4915 21st St,
Racine, WI 53406
Tel: 414.554.1390 Fax: 414.554.7654

UV Filter Screens (For Lights and Windows)
UV Process Supply, Inc.
1229 E. Courtland St.
Chicago, IL 60614
Tel: 800.621.1296 Fax: 312.880.6647

Wipes
TexWipe Co. (TexSwab)
POB 308
650 E Crescent Ave,
Upper Saddle River, NJ 07458
Tel: 201-327-9100

Miscellaneous Supplies
(available from many lab safety companies):
• Cellulose Wadding (drain pads)
• Chemically Resistant Gloves (3D Systems recommends surgical-type 100% nitrile gloves)
• Eye Wash Stations
• Fire Extinguisher
• Fire Proof Waste Can
• Fire-resistant Storage Cabinets
• Lab Coats
• Neoprene Coated Gloves (for working with TPM)
• Tri-Propylene Glycol Monomethyl Ether (TPM)
• Safety Glasses (300-400 nm UV-blocking) with side shielding

«
...
29
30
31
32
33
...
»

Summary of Contents for ProJet 7000



































Reviews:

No comments