36
3D Systems, Inc
.
5. Insert the mass storage device into the printer’s USB host port and select
.
6.
Navigate to the calibration file and select
.
NOTE: The filename may differ from the illustration.
NOTE: The printer may require you to install additional cartridges
or replace a cartridge. Follow the instructions on the screen and
refer to the user guide if necessary.
7.
Once the printer has finished printing, remove the print pad from the printer and
inspect the scales. If adjustments are required, proceed to the next step. If the
scales are aligned properly, no further action is required.
8. Navigate to the
Print Jet Calibration
screen and select
OFFSET JETS
.
9.
Since the file has already been printed, select the
checkmark
to continue.
