3D Printing Systems Up Plus Manual Download Page 6

Page: 6 / 56

UP Plus 3D Printer User Manual

1.2.2 The following

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate

WARNING: Indicates a potentially hazardous situation which, if not avoided, may

result in serious injury.

Gloves: When performing certain maintenance procedures, the machine may be hot

and gloves are required to avoid burns.

Safety Glasses: Wear safety glasses to avoid injury to your eyes.

1.2.3 Protection

The printer must not be exposed to

Do not shut down the UP System

model data may be lost.

When using the “Extrude” function, keep

too close, the nozzle may get blocked.

The printer is designed to work properly

humidity of between 20% and 50%

els.

1.2.4 3D Printer burn in test

Before shipping your printer has undergone

screen that it reports several KG’s of us

factory.

1.2.5 Status Indicators

LED State

3D Printer User Manual v 2013.6.10

following classifications are used in this manual

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, may

result in serious injury.

Gloves: When performing certain maintenance procedures, the machine may be hot

and gloves are required to avoid burns.

Glasses: Wear safety glasses to avoid injury to your eyes.

exposed to water or rain, or damage may occur.

System or pull out the USB cable when loading a digital

“Extrude” function, keep at least 50mm between the nozzle and the

blocked.

work properly at an ambient temperature of between 15

between 20% and 50%; Operating outside these limits may result in low quality

1.2.4 3D Printer burn in test

our printer has undergone a thorough test. You will notice in the maintenance

screen that it reports several KG’s of usage, this is normal and from testing prior to leaving the

1.2.5 Status Indicators

Indicates

Solid Red

Printer is not intilised

Solid Green

Printer is ready

2. Overview

manual.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may

WARNING: Indicates a potentially hazardous situation which, if not avoided, may

Gloves: When performing certain maintenance procedures, the machine may be hot

digital model, or the

between the nozzle and the platform. If

between 15°C and 30°C and

result in low quality mod-

ou will notice in the maintenance

, this is normal and from testing prior to leaving the

Printer is not intilised

Printer is ready

Summary of Contents for Up Plus

























































Search results

Summary of Contents for Up Plus

Reviews:

Related manuals for Up Plus

Brands by name

Popular brands

3D Printing Systems Up Plus, Manual

Search results

Summary of Contents for Up Plus

Reviews:

Related manuals for Up Plus

Brands by name

Popular brands