UP Plus 3D Printer User Manual
Fixing STL Files:
If you load a model and parts of it are highlighted in red, then the model h
some errors. The Up software has an option that attempts to fix models with bad surfaces. Under
the “Edit” menu you will see a “Fix” option. Select the model with inverted surfaces, and click the
“Fix” option to try and fix it.
fix it. If you still cannot fix, just try printing a rough version to see if it comes out. If you still have
errors use the option in the print screen called “UnSolid Model” and just print it.
Merging models: Several separate models can be merged into a single file by using the “Merge”
option from the “Edit” menu. Simply open all the models you want to merge and arrange them the
way you want on the platform and click on the “Merge”
components will be saved as a single STL file
3.2.3 View Options
To observe the target model in different ways
Rotate:
Press the middle mouse button and move
served from different angles.
Pan:
Press Ctrl and the middle mouse button at the same time and move
the view to pan. You can also use the arrow keys to pan the view.
Scale:
Rotate the mouse wheel
View:
The system has 8 preset standard views
Click the View button on the toolbar (the startup value for the View button is
options:
4. Troubleshooting
3D Printer User Manual v 2013.6.10
If you load a model and parts of it are highlighted in red, then the model h
The Up software has an option that attempts to fix models with bad surfaces. Under
the “Edit” menu you will see a “Fix” option. Select the model with inverted surfaces, and click the
Also saving the model as a UP3 file, then reopening the file can also
fix it. If you still cannot fix, just try printing a rough version to see if it comes out. If you still have
errors use the option in the print screen called “UnSolid Model” and just print it.
Several separate models can be merged into a single file by using the “Merge”
option from the “Edit” menu. Simply open all the models you want to merge and arrange them the
way you want on the platform and click on the “Merge” option. When you then save th
components will be saved as a single STL file.
Options
in different ways, use the mouse to control the view.
Press the middle mouse button and move the mouse: The view can be
middle mouse button at the same time and move the mouse
You can also use the arrow keys to pan the view.
Rotate the mouse wheel: The view gets zoomed in or out.
The system has 8 preset standard views stored under the “View” button on the toolbar
the View button on the toolbar (the startup value for the View button is “Fit"
Troubleshooting
If you load a model and parts of it are highlighted in red, then the model has
The Up software has an option that attempts to fix models with bad surfaces. Under
the “Edit” menu you will see a “Fix” option. Select the model with inverted surfaces, and click the
a UP3 file, then reopening the file can also
fix it. If you still cannot fix, just try printing a rough version to see if it comes out. If you still have
Several separate models can be merged into a single file by using the “Merge”
option from the “Edit” menu. Simply open all the models you want to merge and arrange them the
option. When you then save the file, all the
can be rotated and ob-
mouse: This causes
stored under the “View” button on the toolbar.
“Fit") to find these
