![background image](http://html1.mh-extra.com/html/3d-printing-systems/up-plus/up-plus_user-manual_3099654044.webp)
UP Plus 3D Printer User Manual
Firstly, move the platform to the bottom, then do a
oxidized ABS.
Lastly, use some heat-resistant material, like 100 p
zers will also be required. Then clip paper or some other heat
up the nozzle.
6.4 Removing / Changing the nozzle
Should the nozzle become blocked, you may
need to remove it in order to unblock, or change
it. To remove the nozzle, first click Withdraw in
the maintenance screen, then onc
at 260c, use the nozzle wrench provided in the
toolkit that comes with your U
ONLY remove the nozzle when it is hot
er block.
6.5 Cleaning the Perfboard
To clean the platform use the included Perfboard pokers, or alternatively use the spatula and
simply just scrape off the surface plastic until smooth on both sides. If you preheat the table
longer the plastic left in the Perfboard becomes soft and the extruded plastic sticks to it, thus not
requiring the holes of the Perfboard to be empty/clean.
6.6 Lubrication of bearings
The bearings on the UP 3D Printer may occasionally require a bit of
ing smoothly. The recommended grease to use is lithium grease. When lubricating the bearings,
first clean off as much old grease as possible from the bearings, and then apply new grease to the
bearing and slide the platform
6.7 Spare parts
Almost all the plastic parts on the printer are printed by the U
If the nozzle is blocked, remove the nozzle and clean it.
The extruder and platform are hot. Use gloves
printer.
3D Printer User Manual v 2013.1.31
move the platform to the bottom, then do a “Withdraw” in order to heat the nozzle to melt the
resistant material, like 100 percent cotton cloth or soft paper. A pair of twe
zers will also be required. Then clip paper or some other heat-resistant things with tweezers to clean
Removing / Changing the nozzle
Should the nozzle become blocked, you may
need to remove it in order to unblock, or change
first click Withdraw in
the maintenance screen, then once the printer is
use the nozzle wrench provided in the
toolkit that comes with your UP Printer.
remove the nozzle when it is hot, trying to remove it while cold will damage the extru
Perfboard
To clean the platform use the included Perfboard pokers, or alternatively use the spatula and
simply just scrape off the surface plastic until smooth on both sides. If you preheat the table
longer the plastic left in the Perfboard becomes soft and the extruded plastic sticks to it, thus not
requiring the holes of the Perfboard to be empty/clean.
Lubrication of bearings
Printer may occasionally require a bit of lubrication to keep it opera
ing smoothly. The recommended grease to use is lithium grease. When lubricating the bearings,
first clean off as much old grease as possible from the bearings, and then apply new grease to the
platform in the appropriate direction to spread the grease.
Almost all the plastic parts on the printer are printed by the UP printer itself. If you need to print
If the nozzle is blocked, remove the nozzle and clean it.
The extruder and platform are hot. Use gloves when working in this area of
printer.
.1.31
heat the nozzle to melt the
ercent cotton cloth or soft paper. A pair of twee-
resistant things with tweezers to clean
e it while cold will damage the extrud-
To clean the platform use the included Perfboard pokers, or alternatively use the spatula and
simply just scrape off the surface plastic until smooth on both sides. If you preheat the table for
longer the plastic left in the Perfboard becomes soft and the extruded plastic sticks to it, thus not
lubrication to keep it operat-
ing smoothly. The recommended grease to use is lithium grease. When lubricating the bearings,
first clean off as much old grease as possible from the bearings, and then apply new grease to the
printer itself. If you need to print
when working in this area of