Pannoramic MIDI 1.18.1 User’s Guide
4 Software Description
Live
You can display a live image of the current specimen in the Live image display field by
clicking
.
This option has no effect on a running digitization process where no live image is displayed.
To display a live image during scanning, select
Show images during scanning
on the Service
panel. If you have selected
Full automatic
mode on the Routine work panel, the
Manual
Focus
and
Manual Exposure
frames are not displayed here.
Filters
Select the filter you want to display the live image with from the
Filters
selection box. The
selected filter will be rotated into position only after displaying the Live image by clicking
.
You can display the Filter properties window by clicking
(for more information,
).
Note:
After 10 seconds, an empty position is rotated into position instead of
the filter. However, the last snapshot is still displayed. In case Lumencor
illumination unit is used, it is triggered by the pco.edge 4.2 camera so it
will not emit light.
Exposure
You can automatically detect the appropriate exposure time by clicking
. You can
also enter the exposure time manually by entering it into the
Exp. Time
field.
Digital Gain
Note:
This is camera-dependent, when working with AxioCam MRm Rev 3
camera the Index value ranges from 0 to 4, and when using pco.edge
4.2 the value ranges from 0 to 6.
You can enter the
Index
value by entering it in the box or by selecting the value with the
arrow buttons. If you raise the
Index
value, the exposition time is halved by every step, and
the image becomes noisier.
May 29, 2014 - Rev. 1
3DHISTECH Ltd.
86(127)