3Com WL-308, Manual

Page: 9 / 28

Connecting the Bridge 9
the list, you must access the bridge’s configuration management system. Details
on this procedure are in “Refreshing the Client List” on page 15.
Hub Connection You can supply network connections for up to four devices, such as computers
and printers, by connecting the bridge to an Ethernet hub, as shown below.
3Com NBX
Telephone Set
Connection
You can provide converged voice and data services in an office cubicle that is not
wired for Ethernet by connecting the bridge to a 3Com NBX telephone set as
shown below. The NBX server is connected to the same switch or router to which
the access point is connected.
Uplink port
Make sure that the workgroup bridge Ethernet cable is plugged into the hub
uplink (MDIX) port. If your hub does not have an uplink port, you must use an
Ethernet crossover cable (not provided), which can be connected in any port.