3Com Switch 4500 26-Port, Configuration Manual

Page: 142 / 396

140 C
HAPTER
7: ACL C
ONFIGURATION
Only one monitor port can be configured on one Switch. If a group of Switches
form a Fabric, only one monitor port can be configured on one Fabric.
2 Configure traffic mirroring
Perform the following configuration in the Ethernet Port View.
Table 141 Configuring Traffic Mirroring
Delete Traffic Mirroring
1 Delete traffic mirroring
Perform the following configuration in the Ethernet Port View.
Table 142 Delete Traffic Mirroring
2 Delete monitor port.
Perform the following configuration in the Ethernet Port View.
Table 143 Delete Monitor Port
For details about the command, refer to the Command Reference Guide .
Configuring the Mapping Relationship Between COS and Local Precedence
The default mapping relationship between 802.1p priority and output queue of
the port is as follows:
Table 144 Mapping between 802.1p Priority Levels and Outbound Queues
Perform the following configuration in System View.
Operation Command
Configure traffic mirroring
mirrored-to { inbound | outbound } {
user-group
acl_number [ rule rule ] | ip-group
acl_number [ rule rule [ link-group acl_number
rule rule ] ] | link-group acl_number [ rule
rule ] } { cpu | monitor-interface }
Operation Command
Cancel the
configuration of traffic
mirroring
undo mirrored-to { inbound | outbound } {
user-group
acl_number [ rule rule ] | ip-group
acl_number | acl_name } [ rule rule ] | link-group
acl_number rule rule ] }
Operation Command
Delete monitor port
undo monitor
802.1p priority level Queues
0 2
1 0
2 1
3 3
4 4
5 5
6 6
7 7