3Com Switch 4500 26-Port, Configuration Manual

Page: 248 / 396

246 C
HAPTER
14: D
EVICE
M
ANAGEMENT
Networking Diagram
Figure 68 Networking for FTP Configuration
Configuration Procedure
1 Configure FTP server parameters on the PC. Define a user named as
Switch
,
password
hello
, read and write authority over the Switch directory on the PC.
2 Configure the Switch
The Switch has been configured with a Telnet user named as
user
, as 3-level user,
with password
hello
, requiring username and password authentication.
Use the
telnet
command to log into the Switch.
<4500>
CAUTION: If the flash memory of the Switch is not enough, you need to first
delete the existing programs in the flash memory and then upload the new ones.
3 Type in the correct command in User View to establish FTP connection, then enter
the correct username and password to log into the FTP server.
<4500> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
4 Enter the authorized directory of the FTP server.
[ftp] cd switch
5 Use the
get
command to download the switch.app from the FTP server to the
flash directory on the FTP server.
[ftp] get switch.app
[ftp] get boot.app
6 Use the
quit
command to release the FTP connection and return to User View.
[ftp] quit
<4500>
7 Upgrade BootROM.
<4500>
boot bootrom boot.app
This will update BootRom file on unit 1. Continue? [Y/N] y
Switch
PC
Network
Switch Switch
PC
Network