3Com SuperStack II Switch 9300 Getting Started Manual Download Page 43

Page: 43 / 62

YSTEM

PECIFICATIONS

Table 10

System Specifications for the SuperStack II Switch 9300

Specifications

Physical Dimensions

6.5 cm (H) x 44 cm (W) x 30.5 cm (D)

2.59 in. (H) x 17.32 in. (W) x 12.00 in. (D)

Weight: 4.1 kg (12 lbs)

Environmental Requirements

Operating Temperature

0 to 50 °C (32 to 122 °F)

Operating Humidity

10 to 95% relative humidity, noncondensing

Storage Temperature

–20 to 85 °C (–4 to 185 °F)

Storage Humidity

95% maximum relative humidity, noncondensing

Safety

Agency Certifications

UL 1950, CSA 22.2 No. 950, TUV EN60950

UK General Approval Statement

The SuperStack

II Switch 9300 is manufactured to the international Safety Standard EN60950

and is approved in the UK under the General Approval Number NS/G/12345/J/100003 for
indirect connection to the public telecommunication network.

Designed to Comply with...

IEC 950

Electromagnetic Emissions
(Agency Certification)

Meets FCC part 15, Subparagraph J, Class A limits, and CISPR Class A limits
Complies with EMC Council Directive 89/336/EEC, Class A limits

Heat Dissipation

175 watts maximum (547 BTU/hour maximum)

Power Supply

Receptacles

15 ampere service receptacles, type N5/15 or NEMA 5-15R (United States and Canada only)

AC Line Frequency

47 to 63 Hz

Input Voltage Options

100 to 240 VAC

Current Rating

1.3 amperes at 120 volts

Summary of Contents for SuperStack II Switch 9300































































Search results

Summary of Contents for SuperStack II Switch 9300

Reviews:

Related manuals for SuperStack II Switch 9300

Brands by name

Popular brands

3Com SuperStack II Switch 9300, Getting Started Manual

Search results

Summary of Contents for SuperStack II Switch 9300

Reviews:

Related manuals for SuperStack II Switch 9300

Brands by name

Popular brands