manualshive.com logo in svg

3Com OfficeConnect 3C892A, User Manual, Page: 76 / 130

Share
Download
3Com OfficeConnect 3C892A User Manual Download Page 76

70

C

HAPTER

 6: A

DVANCED

 C

ONFIGURATION

IP Address and Subnet Mask

The IP address is a unique address which identifies the ISDN LAN Modem on a 
network. The default address (192.168.1.1) is a private IP address which will be 
translated automatically by the ISDN LAN Modem for Internet access. You should 
leave the default unless you are certain that this value must be changed.

The ISDN LAN Modem attempts to use its default IP address to communicate with 
the computer. If communication cannot be established, the ISDN LAN Modem will 
change its default IP address. If this occurs, the IP address shown in Figure 47 and 
the subnet mask will be different.

The subnet mask identifies the subnetwork to which your computer is connected. 
You should leave the default unless you are certain that this value must be 
changed. 

WARNING: 

If you change the IP address and/or the subnet mask, the ISDN LAN 

Modem will re-initialize itself to make the new settings work. All calls will be 
terminated and you may need to reconfigure the IP addresses of the computers 
connected to the ISDN LAN Modem. For a LAN using static IP addresses, you must 
manually reconfigure the IP addresses of the workstations on the LAN via the 
Workstation Parameters window. For a LAN using dynamic IP addresses, if you 
have Windows 98 or 95, launch 

Winipcfg.exe

 (probably located in your Windows 

directory), click 

Release All

 and then click 

Renew All

.

Local Domain Name 

The local domain name identifies your LAN. LAN refers to the network created by 
the ISDN LAN Modem and the devices attached to it. 

Enable DHCP Server

The ISDN LAN Modem provides DHCP server functionality for the LAN which 
automatically assigns a network or IP address to a newly attached workstation on 
an IP network. If another device on your LAN is providing this functionality, or if 
you are using static IP addresses, then you should disable the DHCP server.

Enable NetBIOS Filtering

For Windows Users:

 NetBIOS is primarily used by Windows 98, 95 and NT for 

local file and printer sharing, note that NetBIOS may also be used on other 
operating systems. This protocol can make spurious DNS requests which can 
inadvertently cause the LAN Modem to establish unwanted calls to your Service 
Provider and results in subsequent charges to your phone bill. When this box is 
checked, NetBIOS packets cannot initiate a call, but they will be passed if the call is 
already established. If you have no need to perform file or printer sharing over 
your ISDN connection, you should enable NetBIOS filtering (that is, check the box). 

Summary of Contents for OfficeConnect 3C892A



































































































































Reviews:

No comments