Configuring the 3C882 ISDN Modem for a PC
3-8
To run the SPID Wizard for a second telephone number:
1
From the Configuration dialog box, check the Enabled
box located in the Number 2 group box.
A message box appears and asks you to confirm that you
want to run SPID Wizard.
2
Click
OK
.
The Second Telephone Number dialog box appears.
3
Enter the second telephone number for your ISDN line
and then click
Next
.
Figure 3-7 appears.
4
Click
Finish
.
Configuring Multilink PPP
Multilink PPP is a protocol which provides a method for
combining multiple PPP connections. Multilink PPP combines
the two ISDN B channels, creating a virtual single digital
connection of up to 128 Kbps. Note that the destination you
are dialing must also support Multilink PPP, or the
dual-channel link will not occur and you will get a single
B channel connection. By default, Multilink PPP is enabled.
To enable or disable Multilink PPP, do the following:
1
Click inside the Multilink check box in the PPP area to
clear it (disable) or check it (enable).
2
Click the
Update
button to download the change to your
3C882 ISDN modem’s S register.
Additional configuration may be needed for Multilink PPP. For
details refer to S registers 82 and 83 in Appendix B.
