Removing the 3C905B-TX NIC PACE and 3NICDIAGS Software
4-11
Removing the 3C905B-TX NIC PACE and
3NICDIAGS Software
You can remove the PACE and 3NICDIAGS software from
your PC using Windows 95, Windows NT, or DOS.
Windows 95 and Windows NT 4.0
To remove the PACE and 3NICDIAGS software, follow these
steps:
1 In the Windows Control Panel, select
Add/Remove
Programs
.
2 Select
3Com NIC Diagnostic Utilities
.
3 Click
Add/Remove
.
The 3C905B-TX NIC software is removed from your PC.
DOS
To remove the PACE and 3NICDIAGS software, follow these
steps:
At the DOS prompt, enter:
un3c90x.exe
The program removes the 3C905B-TX software.
Checking the Remote Wake-up Function
If the PC does not boot up when a Magic Packet
™
wake-up
packet is sent, perform these general troubleshooting steps:
1 Verify that the Wake on Link and Wake on Magic
Packet settings are enabled.
a
Click the
Network Neighborhood
icon.
b
Click
Properties
.
c
Double-click the
3Com NIC
icon and click the
Advanced tab.
Make sure that Wake on Link and Wake on Magic Packet
are enabled. If these settings do not exist, either the NIC
is not a Remote Wake-Up NIC or the driver installation file
is outdated. For the latest 3C905B-TX drivers and
installation files, download
EtherDisk
diskette 3.1 or later
from the 3Com Web site:
http://www.3com.com/
Book Page 11 Thursday, April 2, 1998 9:28 AM
