3-10
C
HAPTER
3: I
NSTALLING
THE
N
ETWORK
D
RIVER
If you experience problems that occur only when using the
AutoLink program, display or print the AUTOLINK.LOG file.
The AUTOLINK.LOG file contains a list of all the events that
occurred during the AutoLink installation and configuration
process.
■
To display the file, enter:
type autolink.log | more
■
To print the file, enter:
print autolink.log
Installing the Novell NetWare Server Driver
This driver is installed on a Novell NetWare
server
running
NetWare 4.1.
The \NWSERVER subdirectory on
EtherDisk Diskette #1
contains the driver (3C90X.LAN file) and NetWare Loadable
Modules (NLMs) needed for NetWare 4.1.
The NetWare server driver can also be used on a NetWare
version 3.12 server. Contact Novell to obtain the NLM files
and for instructions for installing the driver in a 3.12
environment. The NetWare 3.11 server is not supported by
the 3C905B-TX NIC.
NetWare Version 4.1
This section describes how to install the NetWare server driver
on
EtherDisk Diskette #1
on a NetWare version 4.1 server.
To import the server driver into a NetWare 4.1 server, follow
these steps:
1 Install the NetWare server software.
2 When the
NIC Selection
menu appears, insert
EtherDisk Diskette #1
in the drive.
3 Press Insert to add a driver externally.
4 Press F3 to change the path.
Book Page 10 Thursday, April 2, 1998 9:28 AM
