96
C
HAPTER
5: I
NSTALLING
N
ET
W
ARE
C
LIENT
AND
S
ERVER
D
RIVERS
Loading the 3Com EtherCD
Copying the Driver
1 Enter this command at the prompt:
NetWare 4.11:
load install
NetWare 5.0:
load nwconfig
2 In the Configuration Options screen, select
Driver options
.
3 In the Driver Options screen, select
Configure network drivers.
4 In the Additional Driver Actions screen, select
Select a driver
.
The Select a Driver screen appears, listing all previously
saved drivers in the system.
If this is the first installation of the 3Com server NIC driver,
it does not appear in this list.
5 Press Insert.
A system message for selecting a disk drive appears.
6 Press F3.
7 Enter a path to the volume that contains the driver.
For example:
3C99XC_TXM:\nwserver
The Select a Driver to Install screen appears with the 3Com
EtherLink Server NIC driver name highlighted.
8 Press Enter to select the driver.
NetWare 4.11
Insert the CD in the CD-ROM drive and enter
these commands:
load cdrom
cd mount 3C99XC_TXM
NetWare 5.0
Insert the CD in the CD-ROM drive and enter this
command:
load cdrom
Wait for the message that states the CD is
mounted successfully, and then proceed to copy
the driver.
