Installing the NetWare Server Driver
53
5 At the prompt, enter the command:
NWSERVER
For example:
a:\nwserver
The installation program gathers the files and prompts
you for a NIC selection.
6 Press [Enter] to select the driver displayed and
continue the installation.
Loading the Driver Manually
To update an existing server driver manually:
1 Copy all of the files from the \NWSERVER
subdirectory on the EtherCD to the server's
hard drive.
2 Boot the server and launch the Install program.
3 Edit the AUTOEXEC.NCF file to add the following line
(assuming the server start directory is C:\NWSERVER,
where the LAN drivers and NLM files were copied):
LOAD C:\NWSERVER\3C90X.LAN
SLOT=<slotnumber>
The <slotnumber> variable is the hexadecimal slot number
of the PCI NIC. See “
Verifying the PCI Slot Number
” for
instructions on obtaining this number.
NetWare 5.x
There are two ways to install the NetWare 5.x driver:
■
Import the driver when installing the NetWare
server software.
■
Copy the driver to the server's hard disk, and then
load the driver manually.
Importing the Server Driver
To import the server driver into a NetWare 5.x server:
1 Install the NetWare server software.
2 Press [ESC] when the new hardware screen appears.
3 Insert the EtherCD in the CD-ROM when the NIC
selection menu appears.
book Page 53 Thursday, July 29, 1999 12:23 PM
