3Com BETA Getting Started Manual Download Page 62

Page: 62 / 70

Chapter 6. Administration of the Telecommuting Module

Load from diskette

Insert the diskette with the saved configuration into the Telecommuting Module’s floppy
drive and press

Load from diskette

. Do not remove the diskette until the light on the floppy

drive goes out. The contents of the diskette are now loaded in the preliminary configuration.

Save to local file

Press

Save to local file

to save the preliminary configuration to the file you have selected. A

new window is opened where you enter the name of the file.

Load from local file

Press

Load from local file

to load a new preliminary configuration from the file you have

selected.

Browse

Browse

is used to scan your local disk. The web browser opens a new window where you

can search among files and directories. Go to the right directory and select the file you want
to upload.

Save/Load CLI Command File

All configurations can be saved to and loaded from a CLI file (see chapter 18 of the Refer-
ence Guide for more information about the CLI). You can also edit the CLI file before it is
uploaded again.

Uploading a CLI file might affect the permanent configuration, as the CLI file can contain
commands that applies the configuration.

Save config to CLI file

Press

Save config to CLI file

to save the preliminary configuration to the file you have

selected. A new window is opened where you enter the name of the file.

Load CLI file

Press

Load CLI file

to upload a CLI file to the Telecommuting Module.

Browse

Browse

is used to scan your local disk. The web browser opens a new window where you

can search among files and directories. Go to the right directory and select the file you want
to upload.

Summary of Contents for BETA







































































Search results

Summary of Contents for BETA

Reviews:

Related manuals for BETA

Brands by name

Popular brands

3Com BETA, Getting Started Manual

Search results

Summary of Contents for BETA

Reviews:

Related manuals for BETA

Brands by name

Popular brands