3Com BETA Getting Started Manual Download Page 16 | Manualshive

Page: 16 / 70

background image

Chapter 3. Installing 3Com VCX IP Telecommuting Module

If you choose to allow only one computer to configure the Telecommuting Module, you are
asked for the IP address (the mask is set automatically).

IP address [0.0.0.0]:

10.47.2.240

If this IP address is not on the same network as the IP address of the Telecommuting Mod-
ule, you are asked for the router. Enter the IP address of the router on the network where
the Telecommuting Module is connected. Then enter the network address and mask of the
network containing the

configuring computer

.

Static routing:
The computer allowed to configure from is not on a network local to
this unit. You must configure a static route to it. Give
the IP address of the router on the network the unit is on.

The IP address of the router [0.0.0.0]:

10.47.3.1

Network address [10.47.0.0]:

10.10.0.0

Netmask [255.255.255.0]:

You can choose to allow several computers to configure the Telecommuting Module, by
answering no to the question:

Configure from a single computer? (y/n) [y]

n

The installation program then asks for the network number. The configuration computers
must be entered as a complete subnet, i. e. a range which can be written as a network number
and a netmask (like 10.47.2.128 with netmask 255.255.255.128, which means the computers
10.47.2.128-10.47.2.255). All computers on this subnet will be allowed to configure the
Telecommuting Module. For more information about network numbers and netmasks, see
chapter 3 of the User Manual.

Network number [0.0.0.0]:

10.47.2.0

Netmask/bits [255.255.255.0]:

255.255.255.0

If the network or partial network is not directly connected to the Telecommuting Module,
you must enter the IP address of the router leading to that network. Then enter the network’s
address and mask.

Static routing:
The network allowed to configure from is not on a network local to this
unit. You must configure a static route to it. Give the
IP address of the router on the network this unit is on.

The IP address of the router [0.0.0.0]:

10.47.3.1

Network address [10.47.0.0]:

10.10.0.0

Netmask [255.255.255.0]:

Then enter a password.

8

«
...
14
15
16
17
18
...
»

Summary of Contents for BETA







































































Reviews:

No comments

Related manuals for BETA

Brand: Lawler Pages: 5

Brand: K'Nex Education Pages: 56

Brand: Taco Electronic Solutions Pages: 28

Brand: Waterway Pages: 8

Frigolink FVB110B

Brand: WURM Pages: 4

Brand: Gardigo Pages: 6

Brand: VAT Pages: 14

Brand: Acuity Controls Pages: 5

Brand: Risco Pages: 232

CompleteStat-Series CS9B-THO

Brand: Bard Pages: 2

Waukesha Cherry-Burrell D4 Series

Brand: SPX FLOW Pages: 34

Brand: AUMA Pages: 24

Brand: VALSTEAM ADCA Pages: 4

Brand: AirCycler Pages: 2

Torque Converter Lock-Up

Brand: TS Performance Pages: 4

Brand: Danfoss Pages: 8

PNOZ m EF 4DI4DOR

Brand: Pilz Pages: 28

Brand: YASKAWA Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands