3Com BETA Getting Started Manual Download Page 39 | Manualshive

Page: 39 / 70

background image

Chapter 4. Network Configuration

Basic Configuration

On the

Basic Configuration

page, general settings for the Telecommuting Module are made.

The most important one for getting started is the DNS server.

General

Name of this Telecommuting Module

Here, you can give your 3Com VCX IP Telecommuting Module a name. The name of the
Telecommuting Module is displayed in the title bar of your web browser. This can be a good
idea if you administer several Telecommuting Modules. The name is also used if you use
SNMP and when you export log files into the WELF format.

Default domain

Here, you can enter a default domain for all settings. If a default domain is en-
tered, the Telecommuting Module will automatically assume that an incomplete computer
name should be completed with the default. If, for example,

Default domain

contains

company.com

, you could as the name of the computer axel.company.com use only

axel

.

If no default domain should be used, the

Default domain

field should contain a single dot

(.).

IP Policy

Here, you specify what will happen to IP packets which are neither SIP packets, SIP session
media streams, or Telecommuting Module administration traffic.

Discard IP packets

means

that the Telecommuting Module ignores the IP packets without replying that the packet did
not arrive.

Reject IP packets

makes the Telecommuting Module reply with an ICMP packet

telling that the packet did not arrive.

Policy For Ping To Your 3Com VCX IP Telecommuting Module

Here, you specify how the Telecommuting Module should reply to ping packets to its IP
addresses. You can choose between

Never reply to ping

,

Only reply to ping from the

same interface

and

Reply to ping to all IP addresses

.

Only reply to ping from the same

interface

means that the ping request should originate from a network which is directly-

connected to the pinged interface of the Telecommuting Module or from a network to which
there exists a static route from the pinged interface, or the request will be ignored.

31

«
...
37
38
39
40
41
...
»

Summary of Contents for BETA







































































Reviews:

No comments

Related manuals for BETA

Brand: CAME Pages: 18

Brand: CAME Pages: 28

Brand: CAME Pages: 28

Brand: CAME Pages: 4

Brand: CAME Pages: 40

Brand: CAME Pages: 26

Brand: CAME Pages: 34

Brand: CAME Pages: 2

Brand: Watts Pages: 4

Brand: Zennio Pages: 30

Brand: Zeta Pages: 13

1E0671-1 MCR2.9

Brand: Haberl Electronic Pages: 9

Brand: J+J Pages: 2

Brand: IDTECK Pages: 12

Brand: Banner Pages: 2

CGLine+ Web Controller

Brand: Eaton Pages: 28

Brand: Parker Pages: 38

Brand: Parker Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands