3Com BETA Getting Started Manual Download Page 13 | Manualshive

Page: 13 / 70

background image

Chapter 3. Installing 3Com VCX IP
Telecommuting Module

Installation

There are three ways to install an 3Com VCX IP Telecommuting Module: using a serial
cable, using a diskette or perform a magic ping.

Installation with a serial cable or a diskette requires being at the same place as the Telecom-
muting Module, but will give more options for the start configuration.

Installation with magic ping does not require being on the same place as the Telecommuting
Module (but the computer has to be connected to the same logical network as the Telecom-
muting Module), but restricts the start configuration.

Installation with magic ping

You can use the magic ping to set an IP address for the Telecommuting Module. This is how
to perform a magic ping:

•

Plug in the power cord and turn the Telecommuting Module on.

•

Wait while the Telecommuting Module boots up.

•

Connect the network cables to the network interfaces.

•

Find out the MAC address of the Telecommuting Module (printed on the Telecommuting
Module label). This is the MAC address of

Network Interface 1

.

•

Add a static entry in your local ARP table consisting of the Telecommuting Module’s
MAC address and the IP address it should have on eth0.

This is how to add a static ARP entry if you use a Windows computer:

Run the command

command

(or cmd).

In the Command window, enter the command arp -s

ipaddress macaddress

where

ipad-

dress

is the new IP address for the eth0 interface, and

macaddress

is the MAC address

printed on the Telecommuting Module, but with all colons (:) replaced with dashes (-).

•

Ping this IP address to give the Telecommuting Module its new IP address. You should
receive a ping reply if the address distribution was successful.

•

Configure the rest through a web browser.

The magic ping will not set any password. Set a password immediately via the web user
interface. Before any configuration has been made, only the computer which performed the
magic ping will be able to configure the 3Com VCX IP Telecommuting Module.

Installation with a serial cable

These steps are performed when installing with a serial cable:

5

«
...
11
12
13
14
15
...
»

Summary of Contents for BETA







































































Reviews:

No comments

Related manuals for BETA

Brand: Panasonic Pages: 68

Brand: Panasonic Pages: 27

Brand: Panasonic Pages: 168

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 29

Brand: Panasonic Pages: 37

Brand: Panasonic Pages: 9

Brand: Fagor Pages: 10

Brand: Fagor Pages: 358

Brand: Fagor Pages: 556

Brand: Fagor Pages: 172

Brand: Fagor Pages: 180

Brand: Fagor Pages: 112

Master Control Unit

Brand: FaderMate Pages: 36

Brand: Harmonic Drive Pages: 85

Brand: Lawler Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands