10
Indicator
Color
State
Description
Off No
power
On
Failure of CPU or system
Amber
Blinking
System initiation or reset (software self-
testing and loading)
LED 1
(Power/
System)
Green
On
Powered on and ready for operation
Off Radio
disabled
On Radio
enabled
LED 2
(2.4G)
Green
Blinking Activity
Off Radio
disabled
On Radio
enabled
LED 3
(5G)
Green
Blinking Activity
Off
No 10/100/1000 BASE-T link detected, or
administratively disabled
On
10/100 BASE-T link detected; no activity
Amber
Blinking
10/100 BASE-T link activity
On
1000 BASE-T link detected; no activity
LED 4
(Ethernet)
Green
Blinking
1000 BASE-T link activity
3 Connecting to the AP(FAT AP)
On a Network with a DHCP Server
The DHCP server automatically assigns an IP address to the AP.
To find the address, either get it from the DHCP Server, or enter the following command
at the CLI interface:
<9552> display vlan 1
On a Network Without Any DHCP Server
The AP uses the default factory configuration that includes the following information.
z
The default IP address of the AP is 192.168.0.50.
z
The AP has the Telnet server enabled by default. The default authentication
username and password are
admin,
and
password
respectively (case
sensitive). You can remotely manage and maintain the AP through Telnet.
Log into the AP (FAT AP)
To Log into the AP after you determine its IP address, follows these steps:
