manualshive.com logo in svg

3Com 3CRWE554G72T - OfficeConnect Wireless 11g Cable/DSL Router, User Manual

The 3Com 3CRWE554G72T - OfficeConnect Wireless 11g Cable/DSL Router is a high-performance networking device for small offices. To get the most out of this amazing router, make sure to download the free User Manual from manualshive.com. This comprehensive manual provides all the necessary instructions and configuration details for optimal use.

Share
Download
background image

126

A

PPENDIX

 E: E

ND

 U

SER

 S

OFTWARE

 L

ICENSE

 A

GREEMENT

3Com and its suppliers. You agree to hold such trade secrets in confidence. You further acknowledge and agree that ownership of, and title to, the 
Software and Documentation and all subsequent copies thereof regardless of the form or media are held by 3Com and its suppliers.

UNITED STATES GOVERNMENT LEGENDS:  

The Software, Documentation and any other technical data provided hereunder is commercial in nature 

and developed solely at private expense.  The Software is delivered as ìCommercial Computer Softwareî as defined in DFARS 252.227-7014 (June 1995) 
or as a commercial item as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in this Agreement, which is 3Com’s 
standard commercial license for the Software.  Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov. 1995) or FAR 
52.227-14 (June 1987), whichever is applicable.

TERM AND TERMINATION:  

The licenses granted hereunder are perpetual unless terminated earlier as specified below. You may terminate the licenses 

and this Agreement at any time by destroying the Software and Documentation together with all copies and merged portions in any form. The licenses 
and this Agreement will also terminate immediately if you fail to comply with any term or condition of this Agreement. Upon such termination you 
agree to destroy the Software and Documentation, together with all copies and merged portions in any form.

LIMITED WARRANTIES AND LIMITATION OF LIABILITY: 

All warranties and limitations of liability applicable to the Software are as stated on the 

Limited Warranty Card or in the product manual, whether in paper or electronic form, accompanying the Software.   Such warranties and limitations of 
liability are incorporated herein in their entirety by this reference. 

GOVERNING LAW:   

This Agreement shall be governed by the laws of the State of California, U.S.A. excluding its conflicts of laws principles and 

excluding the United Nations Convention on Contracts for the International Sale of Goods.

SEVERABILITY: 

 In the event any provision of this Agreement is found to be invalid, illegal or unenforceable, the validity, legality and enforceability of 

any of the remaining provisions shall not in any way be affected or impaired and a valid, legal and enforceable provision of similar intent and economic 
impact shall be substituted therefor.

ENTIRE AGREEMENT:  

This Agreement sets forth the entire understanding and agreement between you and 3Com and supersedes all prior 

agreements, whether written or oral, with respect to the Software and Documentation, and may be amended only in a writing signed by both parties.

Should you have any questions concerning this Agreement or if you desire to contact 3Com for any reason, please contact the 3Com subsidiary serving 
your country, or write: 3Com Corporation, Customer Support Information, 350 Campus Drive, Marlborough, MA  01752-3064

3Com Corporation

350 Campus Drive,

Marlborough, MA 01752-3064

Copyright © 2004 3Com Corporation and its licensors.  All rights reserved.  3Com is a registered trademark of 3Com Corporation.

Summary of Contents for 3CRWE554G72T - OfficeConnect Wireless 11g Cable/DSL Router



















































































































































Reviews:

No comments

Related manuals for 3CRWE554G72T - OfficeConnect Wireless 11g Cable/DSL Router

D-Link DWL-3500AP Administrator'S Manual preview
DWL-3500AP
Brand: D-Link Pages: 166
Calix E7-2 Application Manual preview
E7-2
Brand: Calix Pages: 225
Daikin EKRACPUR1PA Security Instructions preview
EKRACPUR1PA
Brand: Daikin Pages: 2
Lindy LH900XW Manual preview
LH900XW
Brand: Lindy Pages: 24
G2 Gogen HBTM43 User Manual preview
Gogen HBTM43
Brand: G2 Pages: 22
VT Miltope nMAP2 Quick Start Manual preview
nMAP2
Brand: VT Miltope Pages: 32
Moxa Technologies AirWorks AWK-3131-RCC Series User Manual preview
AirWorks AWK-3131-RCC Series
Brand: Moxa Technologies Pages: 78
Watchguard WGA15731 Hardware Manual preview
WGA15731
Brand: Watchguard Pages: 28
RAK WISAP-MT7628 User Manual preview
WISAP-MT7628
Brand: RAK Pages: 19
ZyXEL Communications MWR211 Manual preview
MWR211
Brand: ZyXEL Communications Pages: 340
ADTRAN BLUESOCKET 3045 Quick Start preview
BLUESOCKET 3045
Brand: ADTRAN Pages: 2
Kogan KAWRTBB300A User Manual preview
KAWRTBB300A
Brand: Kogan Pages: 16
Nfiniti AirStation Draft-N WZR-G300N User Manual preview
AirStation Draft-N WZR-G300N
Brand: Nfiniti Pages: 91
AU Speed Wi-Fi NEXT W03 Notes On Usage preview
Speed Wi-Fi NEXT W03
Brand: AU Pages: 2
Scout Sea-Hub Advanced User'S Manual preview
Sea-Hub
Brand: Scout Pages: 17
PowerTec Cellferno M1200 Quick Start Manual preview
Cellferno M1200
Brand: PowerTec Pages: 12
Westermo MRD-305-DIN User Manual preview
MRD-305-DIN
Brand: Westermo Pages: 28
Canyon CNR-BTU5 User Manual preview
CNR-BTU5
Brand: Canyon Pages: 8

Brands by name

Popular brands

Load more brands