3Com 3CRWDR200A-75-US - OfficeConnect ADSL Wireless 108 Mbps 11g Firewall Router User Manual Download | Manualshive

Page: 126 / 144

background image

126

A

PPENDIX

E: E

ND

U

SER

S

OFTWARE

L

ICENSE

A

GREEMENT

commercial item as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in this Agreement, which is 3Com’s standard
commercial license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov. 1995) or FAR 52.227-14
(June 1987), whichever is applicable.

TERM AND TERMINATION:

The licenses granted hereunder are perpetual unless terminated earlier as specified below. You may terminate the licenses and

this Agreement at any time by destroying the Software and Documentation together with all copies and merged portions in any form. The licenses and this
Agreement will also terminate immediately if you fail to comply with any term or condition of this Agreement. Upon such termination you agree to destroy the
Software and Documentation, together with all copies and merged portions in any form.

LIMITED WARRANTIES AND LIMITATION OF LIABILITY:

All warranties and limitations of liability applicable to the Software are as stated on the

Limited Warranty Card or in the product manual, whether in paper or electronic form, accompanying the Software. Such warranties and limitations of liability
are incorporated herein in their entirety by this reference.

GOVERNING LAW:

This Agreement shall be governed by the laws of the State of California, U.S.A. excluding its conflicts of laws principles and excluding

the United Nations Convention on Contracts for the International Sale of Goods.

SEVERABILITY:

In the event any provision of this Agreement is found to be invalid, illegal or unenforceable, the validity, legality and enforceability of any

of the remaining provisions shall not in any way be affected or impaired and a valid, legal and enforceable provision of similar intent and economic impact shall
be substituted therefor.

ENTIRE AGREEMENT:

This Agreement sets forth the entire understanding and agreement between you and 3Com and supersedes all prior agreements,

whether written or oral, with respect to the Software and Documentation, and may be amended only in a writing signed by both parties.

Should you have any questions concerning this Agreement or if you desire to contact 3Com for any reason, please contact the 3Com subsidiary serving
your country, or write: 3Com Corporation, Customer Support Information, 350 Campus Drive, Marlborough, MA 01752-3064

3Com Corporation

350 Campus Drive,

Marlborough, MA 01752-3064

Copyright © 2004 3Com Corporation and its licensors. All rights reserved. 3Com is a registered trademark of 3Com Corporation.

«
...
124
125
126
127
128
...
»

Summary of Contents for 3CRWDR200A-75-US - OfficeConnect ADSL Wireless 108 Mbps 11g Firewall Router

















































































































































Reviews:

No comments

Related manuals for 3CRWDR200A-75-US - OfficeConnect ADSL Wireless 108 Mbps 11g Firewall Router

Brand: PaloAlto Networks Pages: 2

Brand: H3C Pages: 400

OCTOPUS 5TX-EEC

Brand: Hirschmann Pages: 6

Brand: Vaisala Pages: 32

Hollywood DV-Bridge

Brand: Dazzle Pages: 63

Brand: E-Lins Pages: 9

Brand: ZyXEL Communications Pages: 2

Brand: BHU NETWORKS Pages: 75

Elinx EIR510 Series

Brand: B&B Electronics Pages: 2

Brand: Casablanca Pages: 13

Brand: Allied Telesis Pages: 80

Brand: Conel Pages: 32

Brand: Paradyne Pages: 74

Brand: Planet Pages: 20

WebShare 141 WN

Brand: Atlantis Pages: 78

SA-REP-ETHERLINK_II-1DA-PL

Brand: S-Access Pages: 106

Brand: Linksys Pages: 37

Brand: Advantage Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands