3Com 3CRADSL72 User Manual Download Page 50

Page: 50 / 104

HAPTER

5: R

OUTER

ONFIGURATION

WPA (with RADIUS

Server)

Figure 35

WPA (with RADIUS Server) Screen

WPA (Wireless Protected Access) provides dynamic key changes and
constitutes the best security solution. In a wireless network where not all
devices support WPA, WEP (Wired Equivalent Privacy) should be used.

Wireless Protected Access using a server to distribute keys to the clients:
This option requires that a Radius server is running on the network.

Enter the IP address of the RADIUS server on your network into the

RADIUS Server

field.

Enter the port that the RADIUS server is operating on in the

RADIUS Port

field.

Enter the key for the RADIUS server in the

RADIUS Key

field.

By default, the WPA keys are changed every hour, but if you wish to
change this you can do so by specifying the required time in the

Re-key

Interval

field, in minutes

Press

Apply Changes

Summary of Contents for 3CRADSL72









































































































Search results

Summary of Contents for 3CRADSL72

Reviews:

Related manuals for 3CRADSL72

Brands by name

Popular brands

3Com 3CRADSL72, User Manual

Search results

Summary of Contents for 3CRADSL72

Reviews:

Related manuals for 3CRADSL72

Brands by name

Popular brands