Changing Device Configuration
49
Security Configuration
21
Select the Security Configuration tab to set the security options of the NJ220
IntelliJack.
Password
22
You can change the device password (the default password is “
password
”), and
either enable or disable local configuration.
802.1X
23
To change 802.1X settings for a specific port, select that port’s tab and make the
changes by clicking the box and selecting an option from the drop list. The default
setting for Port Authorize Mode is Disable 802.1X.
802.1X is a standard for port-based network access control. Typical 802.1X
implementations in an Ethernet switch usually include the authenticator as well as
NOTE: You should change the password to ensure that no one else can
re-configure your system. Make sure you remember the new password you set.
If you forget the new password, you will not be able to perform any
other configuration tasks unless you send the device back to 3Com
.
