3Com 3C689 User Manual Download Page 70

G

LOSSARY

3

Packet

The unit of information transmitted over the network, 
consisting of a preamble, a destination address, a source 
address, the data being transmitted, and a code that allows 
testing for correct transmission.

PC Card

The new name (effective 1994) for the standard developed 
by the Personal Computer Memory Card International 
Association.

PCMCIA

Personal Computer Memory Card International Association.

PROTOCOL.INI

An ASCII file containing control information for network 
protocol elements of NDIS network stations and servers.

Release 1.0

In the PC Card environment, the Memory Card Standard 
Release 1.0, September 1990.

Release 2.0

In the PC Card environment, the release in which I/O capability 
and software support were added in September 1991.

Release 2.1

In the PC Card environment, the release containing 
typographical corrections to Release 2.0. There were no 
technical enhancements.

RJ-45

Type of connector that connects the adapter to UTP wiring.

Socket

In the PC Card environment, the hardware in the host 
computer where the PC card is placed. The socket maps the 
host’s internal bus signals to the PC Card interface signals.

Socket Services

The software layer that provides a standardized interface to 
manipulate PC cards, sockets, etc. It is directly above the 
hardware.

Summary of Contents for 3C689













































































Reviews: