Using Auto Configuration
4-3
2
Use a text editor to edit the CONFIG.SYS file on your
computer.
3
Exclude the memory range that the 3C689 adapter is
using. For example, type this line into the device section
of the new CONFIG.SYS file:
device=c:\windows\emm386.exe x=CC000-D3FFF
noems
where
x
stands for exclude, followed by the memory range
that the adapter is using.
Refer to the manual that accompanied the memory manager
software for additional instructions and information.
4
Save the CONFIG.SYS file and exit the text editor.
5
Reboot the computer.
This completes the procedure for avoiding conflicts with a
memory manager. You are now ready to configure the adapter.
Using Auto Configuration
The Auto Configure the 3Com PC Card Adapter option on the
main menu configures the adapter. To perform the auto
configuration procedure, follow these steps:
1
Place the
TokenDisk
diskette in a floppy drive on your
computer and make that drive the active drive. For
example, type:
A: [Enter]
2
Type at the prompt:
INSTALL [Enter]
3
The first time you use the
TokenDisk
diskette, the 3Com
software license box appears. To continue with the
program you must enter Y for Yes.
The AutoLink information screen appears. Press [Enter] to
continue. The main menu appears.
