3
U
SING
THE
A
UTO
L
INK
F
EATURE
FOR
N
ET
W
ARE
The AutoLink feature for NetWare configures the adapter as a
NetWare DOS ODI client. The AutoLink installation steps are
depicted in Figure 3-1.
Figure 3-1
AutoLink Installation Process
This chapter describes the AutoLink program requirements,
ways to avoid memory conflicts, and installation steps. See
Chapter 4 for additional network drivers information.
The AutoLink program performs the following functions:
■
Configures the 3C689 adapter.
■
Tests the adapter.
■
Installs the DOS ODI client driver.
■
Logs on to the server and updates the NetWare client
software if a 3Install account exists on the server; otherwise,
the client software is installed from the
TokenDisk
diskette.
Insert
TokenDisk diskette.
Make diskette drive active.
Type:
AUTOLINK
Select ring speed
Reboot computer
If memory manager is installed,
exclude memory range
CC000 – D3FFF
