4-2
C
HAPTER
4: S
TANDARD
I
NSTALLATION
AND
C
ONFIGURATION
The adapter can be configured automatically or manually.
Automatic configuration selects configuration values for the
adapter. Manual configuration allows you to select the
resources yourself.
If you are preparing your computer for use as a Novell
NetWare DOS client, follow the instructions in Chapter 3.
Configuration Requirements
Verify that you meet the following requirements in addition
to those stated in the Introduction.
■
The 3C689 adapter must be installed in your computer and
connected to the network.
■
No drivers should be loaded during configuration.
Avoiding Memory Manager Conflicts
If you are using a memory manager on your computer (all
computers running Windows have a memory manager such as
EMM386 or its equivalent), you need to inform the memory
manager of the memory used by the 3C689 adapter. The
3C689 adapter requires the following memory:
■
CIS memory 4 K
■
MMIO memory 8 K
■
Shared RAM page size 16 K
If you have Card Services installed in your computer, use the
procedure described in Appendix A instead.
To make this process easier, the following example combines
these memory requirements into one memory range. Follow
these steps to exclude the memory range used by the
3C689 adapter:
1
Make a backup copy of the CONFIG.SYS file. Type:
copy CONFIG.SYS CONFIG.OLD
