3Com 3C16630A, User Manual

Page: 75 / 132

Status 3 - 47
DUA1663-0BAA0 3
Fault Log
The Fault Log screen displays read-only information about the log,
which is updated whenever an abnormal condition is detected.
Figure 3-26 Fault Log Screen
Reset Count This field displays the number of resets recorded at the
time of the fault.
Time (seconds) This field shows the time since the last reset that the
fault occurred.
Area This field identifies the hardware or software that generated the
fault. Make a note of this information, which will be useful to your
technical support representative in resolving the fault.
Fault Number The hexadecimal number in this field provides an
indication of the type of fault. It is for 3Com internal use only. Record any
information on this screen and contact your Technical Support service
for advice.
3Com SuperStack II Fault Log
This information is for internal 3Com use only. You may be asked to quote
the Area and Fault Number if reporting a problem to your supplier.
Time (seconds)
230071456
456366764
Area
NVRAM
POST
Reset Count
1
2
Fault Number
300104
300024
CANCEL