Initialization
3
-
49
DUA1663-0BAA0
3
Initialization
This operation is only available to users with
security
access level. The
initialization operation performs a reset as described in
, and in addition returns the NVRAM to its initial values. You
should only initialize the stack if:
■
The configuration of the stack no longer suits your network.
■
Other troubleshooting efforts have failed.
To display the Initialization screen, actuate the INITIALIZE button on the
Main Menu screen.
Figure 3-28
Initialization Screen
Select OK to perform the initialization.
CAUTION:
U
se this operation with great care. The unit configuration is
cleared from memory and cannot be recovered. All user information
(except the IP parameters) will be lost and only the default users will be
available. All ports will be set to their hardware default values, which
may make unused disabled ports enabled and thus available to users.
This may also cause a loop through the resilient links.
3Com SuperStack II Initialization
OK CANCEL
This operation will change the device
back to the factory defaults.
Summary of Contents for 3C16630A
